Additional information
Composition: Hybrid polymers, mineral fillers, functional additives. Pasty mass of white color.
Adhesive is designed for bonding joints between polyurethane mouldings.
Preliminary requirements: surface must be clean, dry, degreased and dust-free.
Method of application: remove dust from the surface with slightly wet cloth. Apply adhesive on whole surface of one item, hold items in position, press hard and hold for 4-5 seconds. Remove the excess of glue immediately after gluing. Use finishing paper after the full drying of adhesive. You can reposition items within 30 minutes after adhesive application. Full hardening takes 24 hours.
Working conditions: ambient temperature -10°С or more for the duration of work and for next 24 hours. Relative air humidity 40% or more.
Tools cleaning: wash with white spirit immediately after the work.
Shelf life: 24 months from the date of production in a sealed packaging in a dry and cool place, at temperatures between +5°С to +25°С. Freezing of the glue is allowed at temperatures not below -30°С with the following defrostation in a warm room without active heating with a drying fan, radiators, etc (not more than 5 cycles).
Safety precautions: In case of contact of glue with the eyes rinse them thoroughly and consult with the doctor immediately, as for the rest observe common industrial safety rules.
3 easy steps for the best result:
1) Remove dust from the surface with slightly wet cloth
2) Apply adhesive on the whole surface of one item
3) Remove the excess of glue immediately after gluing
